4 Best Red Dots For Hellcat [Updated 2023]
Here are 4 best red dots for Hellcat right out of the box.
Any RMSc footprint red dot optics will mount directly to the Springfield Hellcat slide without additional aftermarket plates or milling services
Let's check them out.
4 Best Springfield Hellcat Red Dot Sights
Disclosure: All products have affiliate links for earning commission to support the website when you purchase
Top 3 Hellcat Optics
Best For CCW
Holosun 507K X2 - Best Overall
Highly recommend milled slide mount for the BEST fit without losing zero
The Holosun HS507K X2 micro RMSc red dot sight is one of the best red dot sight for Hellcat and it fit flush with the width of the slide.
Fast Target Red Dot Acquisition - Similar red dot tracking experience as the full size 507C but much slimmer width
Snag free holster draw - The red dot sight can go in and out of the holster smoothly without getting in the way for IWB and OWB holsters.
Activates via motion sensor - The Holosun ShakeAwake technology instantly activates the red dot reticle upon sensing motion & deactivates when not in motion to save more battery juice (CR1632 battery)
Recoil Proven Glass Lens - Handles +P ammo and the reticle retains zero
Simple battery change without hassle - Access battery from the side tray instead of the bottom. No sight removal or re-zeroing required
- Just the right size for Springfield Hellcat
- Very durable for self defense use
- Reticle lock out mode for CCW
- Same features as Holosun 507C but smaller body
- Need some slide filing to fit (No mounting plate required)
Swampfox Sentinel - Best For The Money
Mount DIRECTLY To Hellcat Optic Ready Slide Without Any Mod
Why Try This One - The Swampfox Sentinel is one of the top selling red dots for Hellcat. It mounts DIRECTLY to Hellcat OSP slide without any mod
7075 Body - Hard coated 7075 T6 aluminum body just like the 507K X2 for reliable duty carry but with a much slimmer lens hood profile
Extra Protection - Mount IRONSLIDES SHIELD to beef up the lens hood from barricade racking, drop and other physical impact to protect the internals. (Buy as additional accessory)
Low Profile Lens Hood - Aim with both eyes open without thick lens frame getting in the way
Manual Model - Shake ‘N Wake motion sensing preserves battery life when Sentinel-M has been still for about 4 minutes. With new motion, Sentinel-M resumes its previous brightness level. Highly recommend manual version for indoor low light use.
Auto Model - A photosensitive ambient light sensor provides dot brightness relative to ambient lighting conditions. There are no manual controls at all.
This is a hassle free option for anyone looking for a Hellcat sight without buying bunch of aftermarket parts or machine services. (Easiest to install right out of the box)
- Easiest RMSc red dot optic to install
- Recoil proof on snappy 9mm subcompact pistol recoil
- Thin lens frame
- Reticle flickers when facing direct sunlight
- Non physical or audible feedback MOA turrets
Shield RMSc Best For Astigmatic Eyes
Will Mount DIRECTLY To Hellcat Slide Without Any Mod
Why use Shield RMSc – The Shield RMSc Hellcat optic shares the same mounting footprint as the original RMS red dot, and it has the clearest lens and dot via a polymer lens for shooters with astigmatism.
Perfect for single stack pistols - Fits flush on the Hellcat OSP optics ready slide. Looks great, feels great and built tough.
Polymer lens for endurance - Withstand up to 10X greater shock impact than glass optics plus minimal lens reflection
Super lightweight for CCW - Carry it any where you go without feeling like there is weight on you.
The optic is powered by one CR2032 battery that lasts about 2 years (recommended to switch out every year). The dot offers 4 or 8 MOA size dots, which are both great for handgun use, especially for the close distance the Hellcat is roughly designed to shoot.
Faster reticle pick up speed with 4 or 8 MOA makes this a great range optic.
- Directly fits on Hellcat slide
- Long battery life
- Skeletonized lens frame to reduce weight
- Polymer glass or glass models offered
- Much expensive than others recommended
Springfield HEX WASP - Auto Dimming Sensor
Why Give The HEX WASP A Try – The Springfield Armory Hex WASP micro red dot sight fits the factory (RMSc footprint red dot) Hellcat OSP slide and the Hellcat Pro without any mods. Get this lightweight 0.7 oz micro red dot for the Hellcat if other optics are challenging to mount.
Serrated Optic Body - Optic serration closely matches the Hellcat slide for good aesthetics and grip surface
Thick Lens Frame - Withstand slide racking against hard surfaces like an RMRcc, and the built in rear iron sight is just like the Holosun 507K
Finer MOA Dot Adjustment - While other optics feature 1 MOA / Click. The WASP features a 0.5 MOA / Click for finer adjustment to be more accurate
Automatic brightness adjustment - The light sensor detects ambient light sources around and adjust the brightness to suit indoor and outdoor use without having to touch any buttons
IPX7 Rated - Built with 6061 T6 aluminum and it's rated high to perform under harsh environmental conditions
- Directly fits on Hellcat slide
- Lasts more than 60000 hrs
- Thicker glass
- Good looks
- Another open emitter design
Does Trijicon RMRcc Fit On Hellcat OSP?
Trijicon RMRcc is an awesome sub compact red dot sight, BUT it will not fit on the optic ready Hellcat slide.
Trijicon RMRcc is longer than the factory slide cut
CHPWS makes awesome adapter plates, but this one does not provide the best solution for mounting a Trijicon RMRcc on the Hellcat.
Here is why:
Need to trim the screw length so it sits flush after reaching 20 in lb before putting RMRcc on top
Even with the plate adapter, the optic just sits too tall, can't use back up iron sights, too bulky, not practical, and NOT aesthetically pleasing.