You don't want to spend $150 on a threaded barrel before you even get started.
No Threaded Barrel Needed. it's all rail mounted.
For the Rival and Mete SFx, those barrels run $83 to $130 from Canik directly, often go out of stock for weeks at a time, and some variants have fitment quirks that mean the TP9SFx barrel won't cross over to the Rival. You're looking at $230 or more before a single round goes downrange. The Wasatch Arms rail-mounted comp sidesteps that whole chain entirely.
Versions You Can Buy Now
Check out Wasatch Arms' official website
Rival SFx
Dedicated Rival SFx version available. The Rival is not in the TP9 family and has its own slide geometry. Get the Rival-specific listing.
Rival-S
Separate Rival-S version available. The Rival-S has a slightly different front end profile than the standard Rival. Wasatch lists it separately.
Mete SFx
Mete SFx version confirmed. Fits the standard Mete SFx and is listed as compatible with the MOS variant. Multiple owners confirm fitment.
Mete SFT
Dedicated Mete SFT version available. The SFT is a shorter gun and not compatible with the SFx comp. Use the SFT-specific listing.
Many options to choose from
Threaded barrel plus a comp body from a separate manufacturer.
Two products, two lead times, one compatibility headache.
- Canik OEM threaded barrel ($83 to $130)
- Separate comp body ($70 to $120)
- Barrel fitment varies by model
- Rival and TP9SFx barrels are not interchangeable
- OEM threaded barrels go out of stock regularly
Wasatch Arms Rail-Mount Option
No barrel purchase
- Single purchase, direct to rail
- Factory barrel stays in place
- Model-specific versions for Rival, Mete SFx, Mete SFT
- Includes built-in Picatinny mount, light/accessory slot preserved
- Ships in stock, installs in five minutes
Rail-Mount vs Barrel-Mount
The comp has to be threaded onto or indexed against the barrel for this to work. That's why the threaded barrel is a hard prerequisite on traditional setups.
Wasatch's approach mounts the comp body to the Picatinny rail on the frame instead. The comp surrounds the muzzle area and captures the gases venting from the barrel crown. It doesn't need to thread onto anything.
The gas still gets redirected, muzzle rise still gets reduced, and the factory barrel stays untouched. Independent testing and real-world owner reports consistently put recoil reduction in a range comparable to traditional comps on the same platform.
There's an added benefit to the rail-mount design that doesn't get discussed enough.
Wasatch Arms Canik Compensator
Wasatch Arms is a small machine shop that makes these in-house. It slides onto the factory 1913 Picatinny rail and is secured with four screws. Installation takes about five minutes and requires no gunsmithing, no permanent modifications, and no tools beyond the included hardware.
A weapon light or other accessory can still be mounted forward of the comp.
However, the comp sits close to the front of the slide, and a few owners mention adding a dab of oil on each side of the slide where it contacts the comp housing during the recoil cycle. It's not a binding issue, just a light friction point that oil eliminates entirely.
- No Threaded Barrel Required
- Frame-Mounted
- 1913 Picatinny Rail Attachment
- 4-Screw Mounting System
Holster options are pretty much not available if you custom design a holster for it unfortunately.
Who Should Buy This
This is the right move if...
- You want a comp and don't want to buy a threaded barrel first
- You're in California or another state where threaded barrels are restricted
- You want to try a comp without committing to a full barrel swap
- Your gun is a Rival, Rival-S, Mete SFx, or Mete SFT
- You're running mixed ammo and don't want to tune spring weights
- You want to keep running a weapon light alongside the comp
Consider barrel-mount instead if...
- You're already running an aftermarket threaded barrel and want to add a comp to what you have
- You want suppressor capability later and need the 1/2x28 thread already on the barrel
- You're building a dedicated competition gun where barrel accuracy upgrade is part of the plan
- You have a Mete SFx Pro, which ships from the factory with a threaded fluted barrel already installed